Tarkett products are known for their consistently superior quality, ease of installation and durability. That’s because we engineer our products to the highest standards. Top quality material is only half of the story. A floor covering's beauty and serviceability is also dependent on installation over a suitable substrate. By carefully following the installation instructions, it should be a simple matter to make each installation of Tarkett resilient flooring a job we can all be proud of. As part of our pledge, our flooring products are covered by extensive warranties against manufacturing defects. Any warranty is only as a good as the job planning and the installation that is performed. Tarkett recognizes the importance of the dealer and installer, and the part they play, in the warranty coverage of our flooring products.
![]() |
![]() |
![]() |
![]() |
We
keep two of Tarkett's best sellers in stock in Colorado Springs.
Pictured above, these two styles are from the Fresh Start collection.
Choosing these two styles was easy, as they priced better than other floating, loose-lay vinyls, and they are georgeous patterns.
FiberFloor is a new kind of resilient flooring. New to North America, but popular in Europe for over a decade. FiberFloor combines a cushiony feel with carefree maintenance and exceptional durability. A unique balanced construction allows the floor to lay flat and stay flat. No glue required!
Tarkett maintenance and warranty information can be found at most Tarkett retailers or by calling Tarkett at 1-800-367-8275. This information may also be obtained on our website.
Tarkett floors are easy to care for. Just sweep or vacuum to remove any dirt or grit. Wash the floor with Tarkett SureShine® Floor Cleaner or other floor cleaner suitable for resilient flooring.
Tarkett floors do not require waxing or polishing. However, applying polish will provide additional protection for the floor. If you choose to apply a polish, we recommend using Tarkett SureShine® High Gloss Polish or Tarkett SureShine® Satin Gloss Polish, depending on the finish of your floor.
To avoid staining, wipe up any spills immediately with a damp cloth or mop. Most household stains can be removed with Tarkett SureShine® Floor Cleaner. See the Tarkett Consumer Protection Guide for more information on common stains.
Tarkett FiberFloor may be installed using the Glueless or Full Spread Installation Systems. See the Tarkett FiberFloor Installation Manual for more information.
Tarkett FiberFloor can be installed over above grade, on grade or below grade concrete substrates, above grade plywood substrates and approved, properly prepared existing floors. See the Tarkett FiberFloor Installation Manual for more information.
Tarkett FiberFloor may be installed over radiant heated floors. The
operating temperature shall not
exceed 85ºF (29ºC).How do I remove stains from my Tarkett floor?
To avoid staining, wipe up any spills immediately with a damp cloth or mop.
Most household stains can be removed with Tarkett SureShine® Floor Cleaner.
See the Tarkett Consumer Protection Guide for more information on common
stains.
Tarkett FiberFloor may be installed using the Glueless or Full Spread
Installation Systems. See the Tarkett FiberFloor Installation Manual for
more information.
Tarkett FiberFloor can be installed over above grade, on grade or below grade concrete substrates, above grade plywood substrates and approved, properly prepared existing floors. See the Tarkett FiberFloor Installation Manual for more information.
Tarkett FiberFloor may be installed over radiant heated floors. The
operating temperature shall not
exceed 85ºF (29ºC).
Yes, the floor can be repaired in different ways depending on the severity of the damage. A qualified, professional installer can perform most repairs.